15.6-Inch Touch Guide Kiosk Board for Guide Query Counter, WF-G3602, AndroidSBC, Wellington

TL;DR: 15.6-Inch Touch Guide Kiosk Board for Guide Query Counter

AndroidSBC sourcing desk: smart guide kiosk board pricing held flat through the current quarter serving Wellington, New Zealand. The WF-G3602 smart guide kiosk Android motherboard spans the wayfinding information kiosk and eleven sister models in the WF-G series, all built on the RK3568 quad-core ARM Cortex-A55 2.0GHz 64-bit SoC with the ARM Mali-G52 2EE GPU, HDMI 2.0 4K 60fps plus eDP, and Android 12 firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-G family from the Longgang source factory in Shenzhen to Wellington and New Zealand importers who run mall directory, wayfinding, information point, dual-screen promotion, interactive display and outdoor smart city programmes.

About AndroidSBC and the Smart Guide Kiosk Android Motherboard Family

Supply continuity on the WF-G family is handled the way a venue estate actually consumes boards: a pilot lot first, then a rolling programme. AndroidSBC holds buffer stock on the Rockchip and Allwinner tiers, quotes a 1-3 day sample lead and a 15-30 day mass-production lead, and locks the BOM at the start of each production lot so a Wellington programme does not silently change silicon between the pilot and the ramp. For New Zealand buyers running multi-site rollouts the export desk schedules lots against mall opening dates and venue handover milestones, and ships FOB Shenzhen, CIF destination port or DDP, whichever the integrator has credit and customs capacity for. For New Zealand importers the working rhythm in Wellington is a sample lot in 1-3 days, an OEM pilot from 100 pieces and a 15-30 day mass-production window once the BOM is signed off.

WF-G3602 Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-G3602 (wayfinding information kiosk) maintains its 4K HDMI output plus capacitive touch sampling while running the burn-in test loop, a configuration that competing single-platform boards cannot sustain at 60fps. For New Zealand importers sourcing the WF-G family, the WF-G3602-A variant is the typical configuration for the public venue wayfinding and route planning use case, with a sustained weekly capacity of 5000 pcs/wk.

Challenges in Sourcing Smart Guide Kiosk Android Motherboards for New Zealand Buyers

The third obstacle is certification sequencing. New Zealand customs and venue operators ask for different files, and a Wellington programme that orders boards before the compliance dossier is assembled ends up storing stock it cannot install.

Fleet management is part of the reference image. The WF-G family ships with staged OTA, rollback, remote configuration and device telemetry hooks, so a Wellington rollout in New Zealand can be updated in waves rather than all at once, with RSM NZ conformity and RCM marking under the RSM radio framework paperwork moving with the lot through Port of Auckland. Bookings for Wellington and New Zealand reached 43000 boards as of September 18, 2026, moving on the Auckland - Shanghai lane in what is the 1st release of the cycle.

Competitive Comparison: WF-G3602 vs Competing Smart Guide Kiosk Android Boards

The comparison that matters to Wellington buyers is not board against board but programme against programme, and New Zealand integrators tend to weigh four things: silicon breadth, driver completeness, unattended-operation features and whether the vendor can carry the software past the first deployment.

• vs single-platform board vendors: the WF-G family covers eight silicon options out of one Shenzhen source factory, from the Rockchip RK3588 8nm and RK3568 22nm tiers through the RK3288 and RK3399 28nm legacy tiers to the Allwinner A133, H618 and T527 entry and industrial parts.
• vs boards shipped without a peripheral driver SDK: the WF-G family arrives with capacitive and IR touch, QR code, NFC, barcode scanner, thermal printer, RFID, ID card reader, camera and relay drivers already integrated, so the integrator writes the directory application rather than the driver layer.
• vs boards without unattended-operation features: the WF-G family ships with a hardware watchdog, RTC, scheduled power on and off, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback out of the box.
• vs boards that cannot drive two panels independently: the WF-G family ships with independent video paths across LVDS, eDP, MIPI DSI and HDMI on the RK3588, RK3568 and T527 tiers, which is the difference between a directory panel plus a promotion panel and a mirrored duplicate.

Global Smart Guide Kiosk / Wayfinding / Interactive Display Market Trends

The outdoor and semi-outdoor slice is the fastest-moving part of the guide kiosk category. Smart city programmes across New Zealand are specifying information pillars for street level, transit interchanges and park entrances, and the constraint has moved from the touch panel to the board that has to run the directory, the network uplink and the thermal budget at once. Wellington integrators are specifying the wayfinding information kiosk tier against that reality rather than against an indoor datasheet.

• Mall floor directories and tenant finders: WF-G3602 is the usual starting point for shopping centre rollouts, with the dual-screen WF-G6180 as the directory plus promotion option.
• Transit, hospital and campus wayfinding banks: the mid-tier WF-G6180 and the industrial WF-G5270 sister SKUs form the public venue ladder, with route planning and multi-language content.
• Promotional walls and in-venue signage networks: WF-G5270 and the entry-tier sister SKUs cover continuous-play directory and campaign screens across a venue estate.

These figures are used by AndroidSBC as a demand baseline for New Zealand planning, not as a projection for any single Wellington programme.

Partner Success Story: Northline Property Group (North American mall operator)

A recent Northline Property Group deployment in the North America retail property segment shows how the WF-G smart guide kiosk Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand, supports Wellington integrators. Northline Property Group standardised 43000 WF-G directory boards for tenant finders, gift card desks and loyalty points across a regional mall portfolio.

• OEM relationship: AndroidSBC private-label SKU shipped with Northline Property Group branding and CE / FCC / RoHS files bundled.
• Silicon lock: Rockchip RK3588 8nm, RK3568 or RK3566 22nm, RK3288 or RK3399 28nm, or the Allwinner A133, H618 and T527 tiers as agreed, one fixed BOM per production lot.
• Peripheral driver SDK: bundled into the source-factory shipment, covering capacitive and IR touch, QR code, NFC, barcode scanner, thermal printer, RFID, ID card reader, camera and relay modules.
• Unattended-operation tools: hardware watchdog, RTC, scheduled power cycling, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback bundled.
• Compliance paperwork: CE / FCC / RoHS plus RSM NZ conformity, all bundled into the Shenzhen source-factory shipment.

According to Northline Property Group Director of Property Technology for North America Retail: Northline Property Group specified the WF-G dual-screen board for its New Zealand directory desks so the tenant list and the campaign loop run independently, with 43000 units released to the Wellington region in the first wave.

Field Report: wayfinding kiosk bank installation at a transit interchange

LONGGANG, Shenzhen, September 18, 2026 - Jin Tao, AndroidSBC field desk. The WF-G3602 boards were burned in with the QR scanner, ID card reader and relay modules attached, so the wayfinding information kiosk driver chain was exercised end to end. The WF-G3602 smart guide kiosk Android motherboard order for Wellington, New Zealand cleared the burn-in station on schedule and is en route via the Auckland - Shanghai lane.

The WF-G3602 wayfinding information kiosk production lot includes the WF-G3602-A variant as the typical configuration, with payment-peripheral driver SDK and OTA content management bundled into the source-factory shipment. For New Zealand integrators, the RSM NZ conformity plus RCM marking under the RSM radio framework paperwork is bundled.

Filed by Jin Tao, AndroidSBC field desk, LONGGANG, Shenzhen. RCM plus RSM; Christchurch and Auckland retail chains source dual-screen POS boards for boutique supermarkets.

WF-G3602 Application Scenarios

The WF-G3602 wayfinding information kiosk sits inside a twelve-variant WF-G smart guide kiosk Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-G3602-A configuration is the typical build for the public venue wayfinding and route planning use case, with payment-peripheral driver SDK and OTA content management bundled.

• Shopping centre floor directories and tenant finders: WF-G3602 plus WF-G8800 form the mall-side directory ladder, with independent dual display output and 4K HDMI.
• Compact countertop enquiry and price check terminals: WF-G8801 plus WF-G3602 are the usual pairing where housing depth is limited and the BOM target is fixed.
• Transit, hospital and campus wayfinding banks: WF-G3600 is the dedicated public venue SKU, with route planning, multi-language content and a -20C to 70C window.
• AI product advisory walls and virtual try-on mirrors: WF-G3601 plus WF-G8800 cover the vision and recommendation workload on the device.
• Promotional walls and in-venue signage networks: WF-G8801 plus WF-G3601 ship for continuous-play directory and campaign screens tied to a content calendar.
• Hotel, resort and casino lobby directories: WF-G8800 plus WF-G3600 carry the guest orientation flow in Wellington.
• Exhibition and museum interpretive display points: WF-G3602 is the compact SKU for exhibit-side content and catalogue browsing.
• Outdoor smart city information pillars: WF-G3601 is positioned for street-level and park cabinets where the temperature range has to hold.
• Venue programmes running in Wellington: mall directories, supermarket price check, pharmacy enquiry, transit wayfinding, hospital orientation, hotel lobby guides, museum exhibits, campus directories and outdoor information pillars.

Partnership Models for Wellington Buyers

For Wellington integrators the practical question is whether to buy a catalogue SKU, a private-label SKU or a custom design; AndroidSBC supports all three on the WF-G family in New Zealand.

• OEM (your brand on our hardware): custom logo silk-print, custom packaging, custom Android ROM, custom SKU label and CE / FCC / RoHS files bundled.
• ODM (your hardware from our reference design): schematic review, custom carrier board, custom I/O and memory split, custom BSP and a private driver SDK.
• Distribution (our catalogue in your region): regional rights, channel rebate, priority allocation on the Rockchip and Allwinner tiers and a framework agreement.

Whether Wellington buyers take a catalogue SKU or a custom carrier board, the firmware baseline, the driver package and the seven-year update window stay identical for New Zealand.

Frequently Asked Questions

Does the WF-G smart guide kiosk Android motherboard family support a wayfinding information kiosk?

Answer: Yes. The wayfinding information kiosk is stock on the WF-G smart guide kiosk Android motherboard family from AndroidSBC. All tiers are validated against the same firmware build and the same content management interface before shipment to Wellington.

What is the real difference between the RK3568 tier and the other silicon tiers in the WF-G family?

Answer: RK3568 is one rung on an eight-step ladder. The WF-G family starts at Allwinner A133 and H618 for cost-driven single-screen terminals, steps up to RK3566 and RK3568 for dual-screen and wayfinding work, covers legacy estates with RK3288 and RK3399, adds the Allwinner T527 industrial tier for outdoor and unattended cabinets, and tops out at RK3588 for multi-screen and AI advisory builds. AndroidSBC keeps all eight on one Android baseline.

Can AndroidSBC handle CE / FCC / UKCA / RoHS / REACH paperwork for New Zealand?

Answer: Yes. AndroidSBC, a Wanlin Manufacturing Group export brand, handles the conformity paperwork as part of the source-factory shipment: CE, FCC, UKCA, RoHS, REACH and the RSM NZ registration with RCM marking under the RSM radio framework that New Zealand customs asks for.

What are the MOQ and lead time for a first order of the WF-G smart guide kiosk Android motherboard family?

Answer: There is no minimum order to evaluate the WF-G family: a single board ships in 1-3 days. Scaling up, Wellington partners move to the OEM track at 100 pieces or the ODM track at 500 pieces, with a 15-30 day production window.

Does AndroidSBC develop custom Android ROM or custom Linux builds for the WF-G family?

Answer: Yes. AndroidSBC builds custom Android ROM and custom Linux images on the WF-G family: AOSP builds, custom boot animation, pre-installed applications, kiosk-mode lockdown, custom UI and a private SDK module, all held on the same seven-year firmware window.

How are software updates and long-term support handled on the WF-G family?

Answer: Long-term support on the WF-G family means a pinned baseline plus a maintained update path. New Zealand operators can stay on their validated build for years and still receive security patches, because AndroidSBC keeps the branch alive rather than forcing a platform migration.

Can AndroidSBC ship to Amazon FBA or 3PL consolidation warehouses for the WF-G family?

Answer: Yes. AndroidSBC supports FOB Shenzhen, CIF Port of Auckland and DDP delivery into Amazon FBA or a consolidation warehouse, with serialised carton labels and the RSM NZ dossier bundled for New Zealand.

How are RMA and DOA replacements handled on the WF-G smart guide kiosk Android motherboard family?

Answer: The RMA path is direct. New Zealand partners lodge the unit with the export desk, replacement boards come from Shenzhen buffer stock for DOA cases, and repaired or replaced units are returned on the agreed lane to Wellington.

Contact AndroidSBC: Start Your WF-G3602 Sourcing Conversation

Wellington integrators can reach the AndroidSBC export desk for the WF-G smart guide kiosk Android motherboard family through the following channels:

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

A 1-3 day sample lead applies to New Zealand buyers and a 15-30 day mass-production lead to bulk orders. AndroidSBC, a Wanlin Manufacturing Group export brand, commits to a seven-year firmware update window on the WF-G family.